Focus Motor – Exploded view

Posted · Add Comment

Focus motor Ø20mm free Aperture form factor  42*42mm

  • The focus unit have a threading for up to M20 (red) (sketch below is just principle)
  • The focus unit will mounted on top of a motor which have a foot print of 42*42mm.
  • Stroke length of approximate 4mm
  • Speed around  2mm/s
  • The bore in the motor will be ~20mm  (blue) – an M12 part can go through the motor and in principle down to the image plane.
  • Contact factory for project

Comments are closed.