New 60mm Stator design Improved design version now delivers up 110Nmm stall for Ø60mm stator with 6N pretension and 5V supply, see newest motors characteristic here. A calibrated torque-cell with an electrical brake and a load cell to measure pre-tension. This allows us to measure the complete torque/speed curve down to stall at different […]
Medico Microscope focus Dosing equipment Instrumentation Dashboard pointers Positioning Laboratory equipment Telecom Filter tuning Audio and video Audio mixing equipment Factory automation and robotics Industrial machinery and equipment Aerospace and aviation Automotive/Marine
No, the rotors are preloaded by springs pressing them against the piezo elements. This results in a holding torque whether the power is on or off. The holding torque is about 2-3x the stall torque. Being able to turn motor power off when not rotating can, in some applications, prove to be a very important […]
With no load on the rotor the start/stop time is less than 1 ms. With load on rotors the start and stop time will of course increase.
A PCBMotor has no inherent, mechanically-defined step size. It will rotate with a constant speed of around 1 revolution per sec is requiredond as long as power is applied. To establish and use stepping functionality, a positioning system, see section “Positioning System”.
