New 60mm Stator design Improved design version now delivers up 110Nmm stall for Ø60mm stator with 6N pretension and 5V supply, see newest motors characteristic here. A calibrated torque-cell with an electrical brake and a load cell to measure pre-tension. This allows us to measure the complete torque/speed curve down to stall at different […]
The tracking controller, PIC16F684, is a microcontroller-based extension to our standard driver. The controller adjusts the frequency for maximum current, which gives optimum performance in the motor regardless of temperature and voltage. When power is applied, the controller turns on the motor and makes an initial frequency sweep to find/store the resonance frequency. The motor […]
Driver two motors with same driver It is fine to drive two motors in parallel on the same output stage as long as they have the same resonance frequency. So if you use motors (same size) and from the same batch and you should be ok, since the frequencies are very close. Motor produced on […]